Hoshizaki DCM-300BAH(-OS) Manuel d'utilisateur télécharger pdf (Page 17)

Fig. 6

11)Disengagethesafetyswitch.Movethecontrolswitchtothe"OFF"position,thenmove

thepowerswitchtothe"OFF"position.Turnoffthepowersupply.

12) Clean the storage bin liner, cover, and components using a neutral cleaner. Rinse

thoroughly after cleaning. Replace the storage bin cover in its correct position.

WARNING! CHOKING HAZARD: Ensure all components, fasteners, and

thumbscrews are securely in place. Make sure that none have fallen into the

storage bin.

13)Movethepowerswitchtothe"ON"position,thenreplacethefrontpanelinitscorrect

position.Turnonthepowersupply,thenmovethecontrolswitchtothe"ICE"positionto

start the automatic icemaking process.

I. Dispense Mode Switch

Thedispensemodeswitchhas"CONTINUOUS"and"PORTION"positions.

Whenthedispensemodeswitchisinthe"CONTINUOUS"position,icedispenses

continuously for a maximum of 60 seconds per activation.

Whenthedispensemodeswitchisinthe"PORTION"position,icedispensesforthe

amount of time determined by the ice dispense time setting. The ice dispense time

control is located on the control board. The dial indicates dispense time in seconds.

See Fig. 6. When shipped, the ice dispense time control is set to the minimum

dispense time of 0.6 sec. At this setting, approximately 0.72 oz. of ice is dispensed. The

DCM-300BAH(-OS) dispenses approximately 1.2 oz. of ice per second.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Pas de commentaire

Hoshizaki DCM-300BAH(-OS) Manuel d'utilisateur Page 17