Hoshizaki DB-130H Manuel d'utilisateur télécharger pdf (Page 10)

C. Spout Switch

1) Turn off the power supply.

2) Remove the front panel.

3) Remove the spout switch assembly and Barrier (A).

4) Disconnect the connectors from the spout switch leads.

5) Install a new spout switch.

6) Assemble the removed parts in the reverse order of the above procedure.

7) Turn on the power supply.

D. Solenoid

1) Turn off the power supply.

2) Remove the front panel and the left side panel.

3) Disconnect the connectors from the solenoid leads, and remove the solenoid assembly.

4) Remove the solenoid, and install a new solenoid. Securing torque should be

13 to 17.3 in. lb.

5) Assemble the removed parts in the reverse order of the above procedure.

6) Turn on the power supply.

1 2 ... 5 6 7 8 9 10 11 12 13

Pas de commentaire

Hoshizaki DB-130H Manuel d'utilisateur Page 10