Hoshizaki FD-1001MRH(-C) Manuel d'utilisateur télécharger pdf (Page 16)

E. Electrical Connection

WARNING

For All Models

1. Electrical connection must be hard-wired and must meet national, state, and

local electrical code requirements. Failure to meet these code requirements

could result in death, electric shock, serious injury, re, or severe damage to

equipment.

2. This unit requires an independent power supply. See the nameplate for

proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse

can result in a tripped breaker, blown fuse, or damage to existing wiring. This

could lead to heat generation or re.

3. THIS UNIT MUST BE GROUNDED. Failure to properly ground this unit

could result in death or serious injury.

4. Electrical connection must be made in accordance with the instructions on

the "WARNING" tag, provided with the pig tail leads in the junction box. See

Fig. 3.

Additional Warnings for Remote Air-Cooled Model

5. THE REMOTE CONDENSER UNIT MUST BE GROUNDED. The power

supply and ground wire to the remote condenser unit are supplied from the

icemaker. See "II.F.5. Electrical Connection."

6. To reduce the risk of electric shock, make all remote condenser unit

connections before connecting the icemaker power supply.

7. On remote air-cooled model, the icemaker should have power for a minimum

of 4 hours prior to startup to prevent compressor damage.

•Usuallyanelectricalpermitandservicesofalicensedelectricianarerequired.

•Themaximumallowablevoltagevariationis±10percentofthenameplaterating.

•Thewhiteleadmustbeconnectedtothe

neutral conductor of the power source.

CAUTION! Miswiring may result in severe

damage to the icemaker. See Fig. 3.

•Theopeningforthepowersupplyconnection

is 7/8" DIA to t a 1/2" trade size conduit.

Fig. 3

FD-1001MAH(-C)

FD-1001MWH(-C)

FD-1001MRH(-C)

WARNING

ELECTRICAL CONNECTION

The white lead must be connected

to the neutral conductor of

the power source.

Miswiring results in severe

damage to the icemaker.

(See Fig. below)

115-120/60/1

435005-012

JUNCTION BOX

15-120V

BROWN

WHITE

WARNING

ELECTRICAL CONNECTION

The white lead must be connected

to the neutral conductor of

the power source.

Miswiring results in severe

damage to the icemaker.

(See Fig. below)

208-230/60/1

428430-014

JUNCTION BOX

208-230

BROWN

BLACK

WHITE

(3 wire with neutral

for 115V)

15-

120V

FD-1001MLH(-C)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 43 44

Commentaires sur ces manuels

Pas de commentaire

Hoshizaki FD-1001MRH(-C) Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Congélateurs Hoshizaki FD-1001MRH(-C)